Parallel Interface; Safety Approvals - Epson Stylus Pro 5000 User Manual

EPSON Stylus Pro 5000
Dimensions Storage
Width: 25.2 inches (640 mm)
Depth: 17.3 inches (439 mm) maximum
Height: 8.8 inches (224 mm)
Printing (A3 size paper)
Width: 25.2 inches (640 mm)
Depth: 27.7 inches (704 mm) maximum
Height: 8.8 inches (224 mm)
Printing (letter size paper, lower paper cassette
installed)
Width: 25.2 inches (640 mm)
Depth: 21.4 inches (544 mm) maximum
Height: 12.5 inches (318 mm)
Weight 48.5 lb (22 kg) without the ink cartridges
Environmental
Temperature Operation: 50 to 95 °F (10 to 35 °C)
Storage:
Humidity Operation: 20 to 80% RH
Storage:

Safety Approvals

Safety standards UL 1950, CSA C22.2 950
EMC FCC part 15 subpart B class B
CSA C108.8 class B
4 - EPSON Stylus Pro 5000
4 to 140 °F ( 20 to 60 °C),
– –
stored in shipping container
1 month at 104 °F (40 °C)
120 hours at 140 °F (60 °C)
5 to 85% RH (stored in
shipping container, without
condensation)
Interfaces

Parallel interface

The built-in parallel interface supports compatibility and ECP
modes
Compatibility mode
Forward channel
Data format: 8-bit parallel, IEEE-1284 compatibility
mode
Synchronization:
STROBE
Handshake
BUSY
timing:
Signal level: TTL compatible
Connector: 57-30360 Amphenol connector or
equivalent
Reverse channel
Transmission IEEE-1284 Nibble mode
mode:
Adaptable 57-30360 Amphenol connector or
connector: equivalent
Synchronization: Refer to the IEEE-1284 specification
Handshaking: Refer to the IEEE-1284 specification
Signal level: IEEE-1284 Level 1 device
Data Refer to the IEEE-1284 specification
transmission
timing:
11/98
pulse
and signals
ACKNLG