Table of Contents
Advertisement
S9361A207X INTEGRATED BOILER CONTROLLERS
Dimensions:
See Fig. 1.
Fig. 1. S936X Integrated Boiler Controller, dimensions in in. (mm).
Electrical Ratings:
Line Voltage: 120 Vac, 60 Hz (220 Vac, 50 Hz on spe-
cific model numbers).
Transformer:
Nominal 24 Vac (maximum 30 Vac, minimum 18
Vac).
5.0 VA plus external loads (gas valve, vent damper,
etc.)
On/Off Circulator, DHW Circulator:
Full Load: 7.4A at 120 Vac (0.75 to 0.8 power factor
[PF]).
Locked Rotor: 44.4A at 120 Vac (0.4 to 0.5 PF).
Inducer (Optional):
Full Load: 6A at 120 Vac (0.75 to 0.8 PF).
Locked Rotor: 17.48A at 120 Vac (0.4 to 0.5 PF).
Vent Damper (Optional):
Full Load: 0.5A at 24 Vac.
In Rush: 1A at 24 Vac.
Main Valve:
Full Load: 2A at 24 Vac (0.5 to 0.6 PF).
In Rush: 6A at 24 Vac (0.5 to 0.6 PF)
Pilot Valve (Optional):
Full Load: 2A at 24 Vac (0.5 to 0.6 PF)
In Rush: 6A at 24 Vac (0.5 to 0.6 PF).
Ambient Ratings:
Humidity: 0 to 95 percent relative humidity,
noncondensing.
69-2751—05
Operating Ambient Temperature: -4°F to +150°F.
Shipping Ambient Temperature: -40°F to +175°F.
Flame Monitoring (May vary by model):
Flame Establishing Period (FEP): Maximum 2 sec-
onds.
Flame Failure Response Time (FFRT):
Maximum: 2.5 seconds @ 1 µA.
Flame Lost Threshold: 0.23 µA.
Accessories (Ordered Separately)
W8735Y1000 Wireless Outdoor Reset Kit
W873ER1000 Wireless Outdoor Reset Module
C7089R1013 Wireless Outdoor Temperature Sensor
(requires W8735ER1000)
W8735S1000 AquaReset™ Outdoor Reset Kit
(includes 50022037-002 Outdoor Reset Module
and C7089U1006 Outdoor Temperature Sensor)
W8735S1008 AquaReset™ Domestic Hot Water Kit
(includes 50022037-005 Domestic Hot Water
Module and 32003971-003 Sensor)
C7089U1006 Outdoor Temperature Sensor (used with
the 50022037-002)
32003971-003 Temperature Sensor (used with
50022037-005)
Sensor (See Table 2).
Sensor Well Clamp 121371AA.
2
1-3/8
(35)
5/8
(16)
M24217
Advertisement
Table of Contents
