Iv-4-2. Nas Settings - Edimax IC-6230DC User Manual

IV-4-2. NAS Settings
If using a NAS server for local storage, configure the settings on this page
according to your NAS.
Status
NAS IP & Sharing
Resource
Notification for
space full
Cycle Recording
Authentication
Username
Password
Displays the status (connected or
disconnected) of your network camera and
NAS server.
Enter the local IP address of your NAS and the
path of a shared folder to store your network
camera's recordings.
Enable or disable email notifications when
your storage space is full.
Enable or disable cycle recording. When
enabled, cycle recording will overwrite the
earliest recordings when the storage space
becomes full. When disabled, recording will
stop when storage is full.
Select "Account" and enter the username and
password in the fields below if your NAS
server requires authentication. Select
"Anonymous" if no authentication is required.
Enter the username if "Account" is selected
above.
Enter the password if "Account" is selected
above.
50