Table of Contents
Advertisement
III. Pair Button
Your gateway unit and camera unit and wirelessly paired at the factory and
manual pairing is not necessary. However if you need to re-pair your units for
some reason, or if you accidently clear the existing pairing, follow the
instructions below. The Pair button will clear existing pairings when pressed
for 5 seconds.
Your gateway unit and camera unit and already paired when you
purchase them and under normal circumstances no manual pairing is
necessary.
1.
Push the Pair button on the gateway unit for 2 seconds to activate pairing.
2.
Within 30 seconds, push the Pair button on the camera unit for 2 seconds.
After a few seconds, the camera's Status LED will flash quickly
indicate successful pairing.
25
orange
to
Advertisement
Table of Contents
