Table of Contents
Advertisement
To unlock the programme, take the same step. i.e. Press INTENSITY ▼ till it reaches zero,
then press & hold the LOCK key for 3 seconds.
7.8 Memory Mode
Once you set intensity >0, the Usage Timer automatically and accumulatively counts
your total usage up to 999 hours 59 minutes.
To enter MEMORY MODE and view the Usage Timer, set
intensity to zero, then press and hold the MODE key for 3
seconds.
The number at bottom left shows the number HOURS,
•
and at bottom right the number of MINUTES.
The number at the top left shows the numbers of uses.
•
Press the MODE key again to return to the previous normal
display. To reset the Usage Timer to zero, press the CH2▼
key and MODE key together for 3 seconds.
8.0 Programmes
Programme table:
P1
P2
P3
P4
P5
P6
Constant. The pulse frequency is selectable. 2-16-Hz
2-100 Hz sweep over cycle time
2-100 Hz sweep over cycle time
80-150 Hz sweep over cycle time
The pulse frequency varies set LOW frequency to set HIGH frequency over
Cycle Time and back. The transition is ramping (triangular wave function).
The pulse frequency varies from set LOW frequency to set HIGH frequency
over Cycle Time and back. The transition is abrupt (square wave function).
22
Advertisement
Table of Contents
