Table of Contents
Advertisement
6.0 How to Assemble Your Unit
Your Flexistim IF has been designed to be simple and easy to use. Assembly of the
Flexistim IF unit is very simple and requires only five steps.
STEP 1: Battery
Slide belt clip down to access battery
cover.
Remove the battery cover and insert the
battery (as shown on the diagram) inside
the battery compartment. Replace the
battery cover.
Note:
Fully charge battery before initial use. See "Charging the Battery" on
page 27.
Caution: There is a risk of explosion if the battery is fitted incorrectly. Replace
only with the correct 3.7 volt lithium battery. Do not dispose of the battery in a
fire and keep it out of reach of children. The battery must be removed from the unit if
unit is not used for a long period of time.
16
Advertisement
Table of Contents
