Pain Relief Programmes - TensCare Ova+ Instructions For Use Manual

Hide thumbs Also See for Ova+:
Table of Contents

Advertisement

7.

PAIN RELIEF PROGRAMMES

The Ova+ offers four pre-set clinically tested programmes which are
displayed on the screen as Mode 0, Mode 1, Mode 2, Mode 3. Each
programme relieves pain in a different way. It is important to try all four
programmes to find which suits you the best. It is also sensible to change
from one programme to another regularly in order to prevent your body
unduly accommodating to one particular programme.
Mode 0 has a constant output that produces a tingling sensation,
activating the Pain Gate. It is the programme that is likely to result in the
greatest pain relief.
Mode 1 also has a constant output but, due to a different pulse width, it
will feel less strong than Mode 0.
Mode 2 contains a burst signal thus the feeling will be one of pulsing. This
programme can have the advantage of achieving, for a time, ongoing
residual pain relief after the Ova+ has been switched off.
Mode 3 is a fast tapping/vibrating sensation. This setting uses the
Endorphin Release mechanism and has been shown to soothe over-
excited nerves.
GENERAL POINTS
i) A microprocessor inside the device offers user-friendly controls and
gentle outputs.
ii) Most users feel a warm, relaxing sensation and pain relief across the
lower tummy during treatments. These results are the favourable effects
produced by the electrical output from the device which copies natural
nerve impulses.
iii) A large LCD screen clearly shows the operation of the unit.
iv) A small clip on the back of the plastic holder of the main unit helps to
attach the device to your underwear, skirt, trousers or pockets.
v) 4 programmes cover typical types of individual nerve differences.
vi) Output current automatically returns to zero when switching
programmes.

Advertisement

Table of Contents
loading

Table of Contents