Related Manuals for Walker WP32NBLED
Summary of Contents for Walker WP32NBLED
- Page 1 OPERATING INSTRUCTIONS WP32NBLED APPROVED COLOUR TELEVISION WITH REMOTE CONTROL BE WALKER WISE...logon to www.walker.ie...
-
Page 2: Table Of Contents
Contents Features ..............2 Managing Stations: Sorting Channel List ..... 18 Introduction ............. 2 On-Screen Information ......... 18 Preparation ............. 2 Media Playback Using Media Browser ....18 Safety Precautions ..........2 Viewing Videos via USB ........18 Viewing Photos via USB ........19 Connection to a Television Distribution System Slideshow Options .......... -
Page 3: Features
Introduction Features • Remote controlled colour LCD TV. Please read the corresponding instructions of this handbook prior to the first usage of the device, even • Fully integrated Terrestrial digital-cable TV (DVB-T when the usage of electronic devices is familiar MPEG2), (DVB-T MPEG4). - Page 4 Servicing pulling from the power cord and never touch the power cord with wet hands as this could cause a short circuit or Please refer all servicing to qualified electric shock. Never make a knot in the cord or tie it with personnel.
-
Page 5: Connection To A Television Distribution System (Cable Tv Etc.) From Tuner
Connection to a Television Distribution Environmental Information System (Cable TV etc.) from Tuner • This television is designed to consume less energy Device connected to the protective earthing of the to save environment. building installation through the mains connection or You not only help to save the environment but also through other apparatus with a connection to protective you can save money by reducing electricity bills... -
Page 6: Package Contents
Package Contents INFO SLEEP SCREEN SOURCE PRESETS LCD TV MENU RETURN Batteries: 2 X AAA LANG. SUBTITLE Instruction Book Remote Control 1 X Video & Audio Connection Cable Note: You should check the accessories after purchasing. Make sure that each accessory is included. -
Page 7: Remote Control Buttons
Remote Control Buttons 1. Standby 2. Image size / Zooms videos (in Media Browser INFO video mode) 3. Sleep timer SLEEP SCREEN SOURCE PRESETS 4. Numeric buttons 5. Exit (in DTV mode) / Return / Index page (in TXT mode) 6. -
Page 8: Lcd Tv And Operating Buttons
LCD TV and Operating Buttons FRONT and REAR VIEW Control switch VIEW Control Switch 1. Up direction 2. Down direction 3. Programme/Volume / AV / Standby-On selection switch Note:You can move the switch, upward or downward to change the volume. If you want to change channels, press the middle of the switch once (Position 3) and then move upward or downward. -
Page 9: Viewing The Connections - Side Connectors
SCART socket on your external device (such as a decoder, a VCR or a DVD player). Note: If an external device is connected via the SCART socket, the TV will automatically switch to AV mode. Note: S-VHS signal is supported via the scart socket (optional). 5. -
Page 10: Using Usb Input
CAUTION ! Using USB Input • Quickly plugging and unplugging USB devices, USB Connection is a very hazardous operation. Especially, do not • You can connect a USB hard disk drive or USB repeatedly quickly plug and unplug the drive. This memory stick to your TV by using the USB inputs may cause physical damage to the USB player and of the TV. -
Page 11: Connecting The Lcd Tv To A Pc
• Multipartiton support is available. Maximum two • Afterwards, you should switch to Side AV source. See different partitions are supported. If the disk have the section Input selection in the following sections more than two partitions, crash may occur. First for more information. -
Page 12: Remote Control Handset
Remote Control Handset Inserting Batteries • Remove the battery cover located on the back of the handset by gently pulling backwards from the indicated part. • Insert two AAA/R3 or equivalent type batteries inside. Observe the correct polarity (+/-) when inserting batteries and replace the battery cover. -
Page 13: Input Selection
functions will be described in accordance with the Input Selection menu system of your TV. Once you have connected external systems to Volume Setting your TV, you can switch to different input sources. • Press “V ” button to increase the volume. Press “V Press “SOURCE”... -
Page 14: Recording Via Epg Screen
INFO (Event Details): Displays the programmes in Blue button (Filter): Views filtering options. detail. Numeric buttons (Jump): Jumps to the preferred Green button: Programme schedule will be listed channel directly via numeric buttons. Yellow button: Display EPG data in accordane with INFO (Details): Displays the programmes in detail. -
Page 15: Digital Teletext (** For Uk Only)
In EPG menu, using this option, you can switch to the the same as the aspect ratio of the picture viewed selected channel. previously. Record / Delete Record Timer • When you press the “ ” button again, the digital teletext screen will be displayed. -
Page 16: Installation
• When set, press “ ” to select Teletext Language. Use “ ” or “ ” to select the desired Teletext Language. • Press OK button on the remote control to continue and the following message will be displayed on the screen: To select the “Yes”... -
Page 17: Manual Tuning
Analogue Fine Tune Manual Tuning • Select Analogue Fine Tune from the Installation HINT: This feature can be used for direct broadcast menu by using “ ” or “ ” and OK buttons. Analogue entry. fine tune screen will be displayed. Analogue Fine •... -
Page 18: Operating The Channel List
Operating the Channel List Locking a Channel You can press GREEN button to tag/untag all channels; YELLOW button to tag/untag a single channel. • Select the channel that you want to lock and select Lock option. Press OK button to continue. •... -
Page 19: Managing Stations: Sorting Channel List
Media Playback Using Media Managing Stations: Sorting Channel List Browser You can select broadcasts to be listed in the channel If the USB stick is not recognized after power off/on list. To display specific types of broadcast, you should or First Time Installation, first, plug the USB device use Active channel list setting. -
Page 20: Viewing Photos Via Usb
Lang (Play Preview): Displays selected file in a small preview screen. RED: Sorts files by name. Play ( button) : Plays all media files starting with the selected one. Yellow Button: Change viewing style BLUE: Changes media options. Jump (Numeric buttons):Jump to selected file using the numeric buttons. -
Page 21: Recordings Library
switched off. You should then switch on the TV to enable recording feature. Otherwise, recording feature will not be available. To view the list of recordings, select “Recordings Library” and press the OK button. Recordings Library will then be displayed with available recordings. : Navigate menu Play button): Starts the playback. -
Page 22: Timeshift Recording
Slide Show Interval: Sets slide show interval time. Instant Recording Show Subtitle: Sets subtitle enabling preference. IMPORTANT: To record a programme, you should Subtitle Language: Sets supported subtitle language. first connect a USB disk to your TV while the TV is Subtitle Position: Sets subtitle position as up or switched off. -
Page 23: Watching Recorded Programmes
Watching Recorded Changing Image Size: Picture Formats Programmes • You can change the aspect ratio (image size) of In the main menu, use “ ” or “ ” buttons to select the TV for viewing the picture in different zoom Media Browser. -
Page 24: Configuring Picture Settings
14:9 Configuring Picture Settings This zooms up the wide picture (14:9 aspect ratio) to You can use different picture settings in detail. the upper and lower limits of the screen. Press MENU button and select the Picture icon by using “ ” or “ ” button. Press OK button to view Picture Settings menu. -
Page 25: Pc Picture Settings
Noise Reduction: If the broadcast signal is weak and Autoposition: Automatically optimizes the display. the picture is noisy, use Noise Reduction setting to Press OK to optimize. reduce the noise amount. Noise Reduction can be set H Position: This item shifts the image horizontally to to one of these options: Low, Medium, High or Off. -
Page 26: Configuring Your Tv's Settings
Operating Settings Menu Items • Press “ ” or “ ” button to highlight a menu item. • Press OK button to select an item. • Press MENU button to exit. Settings Menu Items Conditional Access: Controls conditional access modules when available. Language: Configures language settings. -
Page 27: Configuring Language Preferences
Language Settings Configuring Language Preferences You can operate the TV’s language settings using this menu. Press MENU button and select the Settings icon by using “ ” or “ ” button. Press OK button to view Settings menu. Use “ ” or “ ” button to highlight Language and press OK to continue: In the configuration menu, highlight the Language Settings item by pressing “... -
Page 28: Parental Settings Menu Operation
Setting Programme Timers After coding the correct PIN number, parental settings menu will be displayed: You can set programme timers for a particular programme using this feature. Press “ ” button to set timers on an event. Programme timer function buttons will be displayed on the screen. -
Page 29: Recording Configuration
Hard Disk Info Recording Configuration To view the details about the USB disk, highlight Hard Select Recording Configuration item in the Settings Disk Info by using “ ” or “ ” key and press OK. USB menu to configure recording settings. The following disk information will be displayed menu is displayed for recording configuration. -
Page 30: Configuring Other Settings
• Press“ ” or “ ” buttons to select a source. Audio Description: Audio description refers to an additional narration track for blind and visually • Use “ ” or “ ” button to enable or disable the impaired viewers of visual media, including television selected source. -
Page 31: Teletext
Poor Picture: Have you selected the correct TV Teletext system? Is your TV set or house aerial located too close Teletext system transmits information such as news, to a non-earthed audio equipment or neon lights, etc.? sports and weather on your TV. Note that is the signal Mountains or high buildings can cause double pictures degrades, for example in poor/adverse weather or ghost images. -
Page 32: Appendix A: Pc Input Typical Display Modes
Appendix A: PC Input Typical Appendix B: AV and HDMI Signal Display Modes Compatibility (Input Signal Types) The display has a maximum resolution of 1920 x 1200. The following table is an illustration of some of the Source Supported Signals Available typical video display modes. -
Page 33: Appendix C: Supported Dvi Resolutions
Appendix D: Software Upgrade Appendix C: Supported DVI Resolutions • Your TV is capable of finding and updating new software upgrades over broadcast channels. When connecting devices to your TV’s connectors by • For broadcast channels search, TV looks the using DVI to HDMI cables (not supplied), you can refer available channels stored in your settings. -
Page 34: Appendix E: Supported File Formats For Usb Mode
Appendix E: Supported File Formats for USB Mode File Format Remarks Media Extension Video Audio (Maximum resolution/Bit rate etc.) .mpg, .mpeg MPEG1, 2 MPEG Layer 1/2/3 .dat MPEG1, 2 MPEG2 .vob MPEG2 .mkv H.264, MPEG1,2,4 EAC3 / AC3 MAX 1920x1080 @ 30P 20Mbit/sec MPEG4, Xvid 1.00, Movie Xvid 1.01, Xvid 1.02,... -
Page 35: Specifications
Specifications TV BROADCASTING PAL/SECAM B/G D/K K’ I/I’ L/L’ RECEIVING CHANNELS VHF (BAND I/III) UHF (BAND U) HYPERBAND NUMBER OF PRESET CHANNELS 1000 CHANNEL INDICATOR On Screen Display RF AERIAL INPUT 75 Ohm (unbalanced) OPERATING VOLTAGE 220-240V AC, 50 Hz. AUDIO German + Nicam Stereo AUDIO OUTPUT POWER (W... -
Page 36: Important Instruction
Important Instruction For your own safety read following instruction carefully before attempting to connect this unit to the mains supply. MAINS (AC) OPERATION The wires in the mains lead are coloured in accordance with the following code : GREEN FUSE &...