Contents Features ..............2 Managing Stations: Sorting Channel List ..... 18 Preparation ............. 2 On-Screen Information ......... 18 Safety Precautions ..........2 Media Playback Using Media Browser ....18 Connection to a Television Distribution System Viewing Videos via USB ........19 (Cable TV etc.) from Tuner .........
Introduction Features • Remote controlled colour LED TV. Please read the corresponding instructions of this handbook prior to the first usage of the device, even • Fully integrated Terrestrial digital-cable TV (DVB-T when the usage of electronic devices is familiar MPEG2), (DVB-T MPEG4).
Servicing pulling from the power cord and never touch the power cord with wet hands as this could cause a short circuit or Please refer all servicing to qualified electric shock. Never make a knot in the cord or tie it with personnel.
Connection to a Television Distribution Environmental Information System (Cable TV etc.) from Tuner • This television is designed to consume less energy Device connected to the protective earthing of the to save environment. building installation through the mains connection or You not only help to save the environment but also through other apparatus with a connection to protective you can save money by reducing electricity bills...
Package Contents LED TV Batteries: 2 X AAA Instruction Book Remote Control 1 X Video & Audio Connection Cable Note: You should check the accessories after purchasing. Make sure that each accessory is included. English - 5 -...
LED TV and Operating Buttons FRONT and REAR VIEW Control switch VIEW Control Switch 1. Up direction 2. Down direction 3. Programme/Volume / AV / Standby-On selection switch Note:You can move the switch, upward or downward to change the volume. If you want to change channels, press the middle of the switch once (Position 3) and then move upward or downward.
Note: If an external device is connected via the SCART socket, the TV will automatically switch to AV mode. Note: S-VHS signal is supported via the scart socket (optional). 4. VGA Input is for connecting a personal computer to the TV set. Connect the PC cable between the PC INPUT on the TV and the PC output on your PC.
Note: Plug or unplug your USB disk while the TV is Power Connection switched off. IMPORTANT: The TV set is designed to operate on Note: If you are going to connect a USB hard disk drive 220-240V AC, 50 Hz. to the TV set, USB connection cable used between •...
• Recorded programmes are split into 4GB partitions. Connecting the TV to a PC • Recorded programmes are stored in the following For displaying your computer’s screen image on your directory of the connected USB disk: \DVR\RECS. LED TV, you can connect your computer to the TV set. All recordings are indicated with a number.
• Note: These three methods of connection perform the Connecting to a DVD Player same function but in different levels of quality. It is not • Some DVD players are connected through necessary to connect by all three methods. COMPONENT SOCKETS (YPbPr). YPbPr can be Using Side AV Connectors used only when you connect a device that has a YPbPr output through the PC input with YPbPr to...
the programme that you were watching last will be reselected. By either method the TV will switch on. To Switch the TV Off • Press the “ ” button on the remote control or hold the “ ” button on the TV until shut down , so the TV will switch to standby mode.
Viewing Main Menu • Menu screen cannot be displayed by using the control switch. AV Mode • Press the control switch consecutively until the source OSD is displayed on the screen. Operation with the Remote Control • The remote control of your TV is designed to control all the functions of the model you selected.
(RECORD): the TV will start to record the selected programme. You can press again to stop the recording. Select Channel In EPG menu, using this option, you can switch to the selected channel. Record / Delete Record Timer IMPORTANT: To record a programme, you should first connect a USB disk to your TV while the TV is Red button (Prev Day): Displays the programmes switched off.
• With digital broadcasting (DVB-T), in addition to • By pressing “ ” or “ ” button, select the country digital teletext broadcasting together with the normal you want to set and press “ ” button to highlight broadcasting, there are also channels with just digital Search Type option.
• Select Manual Channel Scan from the Installation menu by using “ ”/“ ” and OK buttons. Manual Scan options screen will be displayed. • Select the desired Search Type using “ ” or “ ” button. Manual search options will change accordingly.
• Use CH or CH buttons to move page up or • Press OK button to proceed. Use “ ” or “ ” button down. to set Fine Tune. When finished, press OK button again. • Press BLUE button to view filtering options. Clear Service List (*) •...
• Press OK button when the desired channel is highlighted to lock/unlock the channel. Lock symbol will be displayed next to the selected channel. Managing Stations: Favourites You can create a list of favourite programmes. • Press MENU button to view main menu. Select Channel List item by using “...
OK button to continue. Media Browser menu options to enable all. You can follow the disabled functions will be displayed. with the change of the icons. Also, when you plug USB devices, media browser BLUE: Changes media options. screen will be displayed automatically: Play button): Starts the video playback.
Jump (Numeric buttons):Jump to selected file using : Navigate menu the numeric buttons. Play button): Starts the playback. OK: Views the selected picture in full screen. Stop ( button) : Stops playback. : Navigate menu Pause ( button) : Pauses the selected playback. Slideshow ( button): Starts the slideshow using RED button: Sorts files by Title,Artist or Album.
Recordings Library You can set your Media Browser preferences by using the Settings dialog. Press “ ” or “ ” button IMPORTANT: To view recordings library, you should to highlight an item and use “ ” or “ ” button to set. first connect a USB disk to your TV while the TV is View Style: Sets default browsing mode.
Watching Recorded Instant Recording Programmes IMPORTANT: To record a programme, you should first connect a USB disk to your TV while the TV is In the main menu, use “ ” or “ ” buttons to select switched off. You should then switch on the TV to Media Browser.
14:9 Zoom Changing Image Size: Picture Formats • You can change the aspect ratio (image size) of the TV for viewing the picture in different zoom modes. This option zooms to the 14:9 picture. • Press SCREEN button repeatedly to change the image size.
Noise Reduction: If the broadcast signal is weak and Configuring Picture Settings the picture is noisy, use Noise Reduction setting to You can use different picture settings in detail. reduce the noise amount. Noise Reduction can be set to one of these options: Low, Medium, High or Off. Press MENU button and select the Picture icon by using “...
Autoposition: Automatically optimizes the display. Press OK to optimize. H Position: This item shifts the image horizontally to right hand side or left hand side of the screen. V Position: This item shifts the image vertically towards the top or bottom of the screen. Dot Clock: Dot Clock adjustments correct the interference that appear as vertical banding in dot intensive presentations like spreadsheets or...
Operating Settings Menu Items Configuring Language • Press “ ” or “ ” button to highlight a menu item. Preferences • Press OK button to select an item. You can operate the TV’s language settings using • Press MENU button to exit. this menu.
Language Settings After coding the correct PIN number, parental settings menu will be displayed: Parental Settings Menu Operation • Select an item by using “ ” or “ ” button. • Use “ ” or “ ” button to set an item. •...
Setting Programme Timers Recording Configuration You can set programme timers for a particular Select Recording Configuration item in the Settings programme using this feature. menu to configure recording settings. The following Press “ ” button to set timers on an event. Programme menu is displayed for recording configuration.
Hard Disk Info • Select Sources in the Settings menu and press OK button. To view the details about the USB disk, highlight Hard Disk Info by using “ ” or “ ” key and press OK. USB • Press“ ” or “ ” buttons to select a source. disk information will be displayed •...
Hard of Hearing: If the broadcaster enables any Other Features special signal concerning the audio, you can set this Displaying TV Information: Programme Number, setting as On to receive such signals. Programme Name, Sound Indicator, time, teletext, Audio Description: Audio description refers to channel type and resolution information is displayed an additional narration track for blind and visually on the screen when a new programme is entered or...
Coloured Buttons (RED/GREEN/YELLOW/ Remote Control: Your TV no longer responds to the remote control. Perhaps the batteries are exhausted. BLUE) If so you can still use the local buttons on the TV. Your TV supports both FASTEXT and TOP text Input Sources: If you cannot select an input source, systems.
Appendix A: PC Input Typical Appendix B: AV and HDMI Signal Display Modes Compatibility (Input Signal Types) The display has a maximum resolution of 1920 x 1200. The following table is an illustration of some of the Source Supported Signals Available typical video display modes.
Appendix D: Software Upgrade Appendix C: Supported DVI Resolutions • Your TV is capable of finding and updating new software upgrades over broadcast channels. When connecting devices to your TV’s connectors by • For broadcast channels search, TV looks the using DVI to HDMI cables (not supplied), you can refer available channels stored in your settings.
Important Instruction For your own safety read following instruction carefully before attempting to connect this unit to the mains supply. MAINS (AC) OPERATION The wires in the mains lead are coloured in accordance with the following code : GREEN FUSE &...