Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Walker WPB21S
Summary of Contents for Walker WPB21S
-
Page 1: Operating Instructions
OPERATING INSTRUCTIONS WPB21S COLOUR TELEVISION WITH REMOTE CONTROL... -
Page 2: Safety Precautions
CAUTION Safety Precautions 1. Power Source RISK OF ELECTRIC SHOCK The receiver should be operated only from a 230-240V AC, The lightning flash with arrowhead symbol, within 50 Hz Outlet. Ensure you select the correct voltage setting an equilateral triangle, is intended to alert the user for your convenience. -
Page 3: Remote Control Buttons
Remote Control Buttons = Stand By MUTE: Mute 0 - 9 = Direct Program AV V = External Source (optional) (AV1, AV2, FAV / BAV, RGB, S-VHS) = Menu TV = TV / Quit Menu - - = Double Digit TXT = Teletext V + / - = Volume +/ - Red (SOUND) = Sound Menu... -
Page 4: Before Switching On Your Tv
Before Switching on your TV Press Programme Up or Down buttons on the front/ Power connection right side of the TV or on the remote control, so that IMPORTANT: The TV set is designed to operate on last switched off programme is selected. 230-240V AC, 50Hz. -
Page 5: Menu System
If you do not accept the locations and / or the Menu System programme names of programmes, you can change Press the " " button. The Main menu will be dis- them in Programme menu. played at the middle on the screen. Operating with the buttons on the TV set Volume setting and programme selection can be made using the buttons on the front panel. - Page 6 When balance control is in mid position, the cursor is To store the Equalizer settings, press “ ” or “ ” displayed with the two reciprocal arrows. button on “STORE” option. Selecting Mode During the store process all the items are stored, moreover, the USER mode information would not be (If your TV has stereo sound system) lost.
- Page 7 Picture Menu To Store the Settings • To enter the Picture menu directly, press the “GREEN” • Press “ ” or “ ” button on STORE option to store button. Picture menu settings. Setting the Brightness, Contrast, Colour and The stored picture mode setting will be valid only in the Sharpness current program.
- Page 8 • VHF1, VHF3 or UHF (in Frequency option) by “ ” Selecting Standard or “ ” button. Using “ ” or “ ” button on STANDARD, you can • “C” or “S” (in Channel option). change the standard to B/G, D/K, I/I’, L/L'. (optional) Selecting Frequency (optional) Selecting Search The frequency value is,...
- Page 9 At the bottom of the menu there is a programme sort To enter Autostore menu, press to the blue button. To functions section. Each function is activated by color learn the features of this function see "AUTOSTORE" button (seen above). NAME allows changing the below.
-
Page 10: Other Features
After Autostore is finalized, a programme list will ap- pear on the screen. In the programme list you will see the programme numbers and names assigned to the programmes. If you do not accept the locations and/or the programme names of programmes, you can change •... - Page 11 TV and Video Recorder The picture quality may degrade when two peripher- als are connected to the TV at the same time. In such • Connect the aerial cables. a case, disconnect one of the peripherals. Better picture quality can be obtained if you also con- No Picture nect a eurocable to EXTERNAL sockets (optional).
-
Page 12: Specifications
Specifications TV BROADCASTING PAL I/I’ RECEIVING CHANNELS VHF (BAND I/III), UHF (BAND U), HYPERBAND CABLE TV (S1-S20 / S21-S41) NUMBER OF PRESET CHANNELS: CHANNEL INDICATOR: On Screen Display RF AERIAL INPUT: 75 Ohm (unbalanced) OPERATING VOLTAGE: 230-240V AC, 50 Hz. AUDIO OUTPUT Nicam Stereo AUDIO OUTPUT POWER (W... -
Page 13: Safety Precaution
Important Safety Information For your own safety please note the following information before attempting to change the mains plug if it should require replacement in future. MAINS (AC) OPERATION The wires in the mains lead are coloured in accordance with the following code : GREEN FUSE &...