Loading And Printing Cds And Dvds; Cleaning The Roller; Inserting A Cd Or Dvd - Epson Stylus Photo R1800 Manual

7. Insert the left roll paper holder (marked with an orange
triangle) into the far left slot (also marked with an orange
triangle). Then insert the other holder into the
corresponding slot on the right.
8. Load the paper part of the way into the roll paper feeder
(under the white rollers), then slide the right roll paper edge
guide to fit lightly against the paper.
Caution: Don't load roll paper into the sheet feeder or the slot
behind the paper support; make sure it is below the white
rollers.
9. Push the paper into the feeder as far as it will go; the printer
feeds the paper automatically.
10. To verify that the paper is loaded straight, open the printer
cover and look into the printer.
If crooked, press the
z roll paper button for
three seconds
If the paper is crooked, press the z roll paper button for
three seconds to back the paper all the way out.
Then turn the roll paper holder knobs to roll up the paper.
Press the ) paper button to clear the paper out error.
Repeat steps 7 through 9 to reload the paper.
Follow the instructions in your User's Guide to print on roll
paper.

Loading and Printing CDs and DVDs

Caution: Use only ink jet printable CDs or DVDs for printing. Do not
use thermal-printable or regular CDs or DVDs.

Cleaning the Roller

Before you print on CDs or DVDs, you may need to clean the
roller inside the printer. You can do this by feeding and
ejecting several sheets of plain paper.
1. Open the output tray and extension.
2. Open the paper support and pull up the support extensions.
3. Turn on the printer and load several
sheets of letter-size paper.
4. Press the ) paper button to feed the
paper.
5. Press the ) paper button again to eject
the paper.
6. Repeat steps 4 and 5 several times to completely clean the
roller.

Inserting a CD or DVD

Make sure the data, music, or video is burned on your ink jet
printable CDs or DVDs before you print. Otherwise, dirt or
scratches on the surface may cause errors when you burn the
data. If you plan to print large numbers of CDs or DVDs, it's
a good idea to print a small sample, then wait a day and check
the quality to make sure it is satisfactory.
See the User's Guide for instructions on checking the print
position or color before printing on your actual CD or DVD.
1. Turn on the printer.
Note: Before you insert a CD or DVD, make sure the printer is
turned on. Otherwise, the disc may not be positioned correctly.
2. Remove any paper from the sheet feeder, then push in the
paper support extensions and close the paper support.
3. If the output tray and extension are open, push them in, but
leave the flap at the end of the tray down.
2/05
Epson Stylus Photo R1800
Epson Stylus Photo R1800
- 11