Epson Stylus Photo 895 Setup Manual page 6

4. Align the tabs on each ink cartridge so that
they rest on top of the tabs protruding from
the base of the ink cartridge clamps. Do not
apply excessive force to the cartridges.
Make sure that the ink cartridge tabs are not
under the tabs protruding from the base of
the opened ink cartridge clamps.
Note:
Install both ink cartridges. The printer will not work with only one
cartridge.
5. Lower the ink cartridge clamps until they lock into place.
6. Press the e ink cartridge replacement button.
The printer moves the print head and begins
charging the ink delivery system. This process
takes about two and a half minutes.
c
Caution:
Always press the e ink cartridge
replacement button to move the print head. Do not move the print
head by hand. Doing so may damage the printer.
While the ink is charging, the Processing light flashes and the Select
Photo display rotates. During this process, printer will emit a variety
of mechanical sounds. These sounds are normal. When the ink
delivery system is charged, the print head will return to the home
(far right) position and the Processing light will come on.
c
Caution:
Never turn off the printer while the processing light is flashing and
the Select Photo display is rotating.
7. Close the printer cover.