Epson Stylus Photo 895 Setup Manual page 3

Attaching the Printer Parts
Insert the paper support into the slots at the rear of the printer.
To attach the roll paper holder, follow the instructions below.
1. With the arrows on the roll paper holder adapter pointing towards
the front of the printer, insert the adapter as far as it will go into the
slot at the rear of the printer.
2. Insert the roll paper holder into the slots at the back of the roll paper
holder adapter.
Note:
You can temporarily mount the roll paper holder on the printer by inserting it
into slots at the rear of the paper support adapter. You do not need to load roll
paper at this time.