Epson Stylus Photo 895 Setup Manual page 12

For Windows 2000 Users
1. Wait until a message appears informing you that the installation is
complete, then Click OK. Do not go to the next step before this
procedure.
2. The Found New Hardware Wizard starts.
3. Click Next, then select search for a sultable driver for my device
(recommended) and click Next.
4. In the Locate Driver Files screen, select Specify a location, then
click Next.
5. When the screen below appears,
click Browse, then specify the
WiN2000 folder in the CD-ROM
drive. Then click OK.
6. In the next screen, confirm the
driver and the directory, then click
Next.
7. When a message appears informing you that the installation is
complete, click Finish. If a message appears asking you to restart
your computer, do so.
Installing Photo Print Software
Note:
EPSON PhotoQuicker, EPSON PhotoStarter, EPSON CardMonitor are
installed.
1. Insert the printer software CD in the CD-ROM drive. The installer
dialog box will appear. Choose Install Photo Print Software, click
the , then click the Start button. (If the installer dialog box does
not appear automatically, double-click EPSETUP.EXE in the CD-
ROM.
2. Follow the on-screen instructions.
3. When a message appears informing you that installation is
complete, click the Finish button.