modway EEI-799 Quick Start Manual

E E I -799
WHITE METAL TWIN BED

STEP 1:

Place the 2pcs Side Rail with Slat (3) into 1pc Support Leg (4) as shown.
Insert 2pcs Bolt (A) into the pre-drilled Holes on the Support Leg (4) through the pre-drilled holes on the Side Rail.
Secure them by using 2pcs Nut (B) from the bottom of the Support Leg (4).
Tighten the Bolt (A) and Nuts (B) with Open Wrench (C) and Allen Wrench (D) as shown.
Repeat the same steps for the remaining Support Leg (4).
3
Ax4

STEP 2:

Place the Headboard (1) close to the assembled Side Rail with Slat (3) and Support Legs (4).
Insert the hooks on the Side Rail with Slats (3) into the hook holder on the Headboard (1) as shown.
Repeat the same steps for the Footboard (2).
Customer Service 908-368-1025— — — — www.modwayfurniture.com
3
4
3
Bx4 Cx1
3
Hooks on side rails
Hook Holder on
Headboard/Footboard
1
4
2
Assembly is completed. The bed is ready to enjoy now!
4
4
Dx1
4
3
3
D
A
A
3
B
3
B
4
C
Hardware & Tool required
1
3
Page 2 of 2