Advertisement
MOTOR REPLACEMENT INSTRUCTION
IMPORTANT:
The Preferred Method Is To Drain Enough Water From The Pool First Then Dismount The Entire Skimmer System Before Replacement. If
User Prefer To Operate It On The Pool, Please Refer To Below Process. Please Note Incorrect Handling Method May Cause Water Leakage Between Canister
And Liner.
1. Insert the Water Stopper into the water intake of pump. Push the Stopper
3. Detach the Locking Ring
and Diverter Fitting
4. Remove Top Cover
, Strainer Basket
5
advised to use a water container, such as a bucket shown with dotted
line in the illustration to collect the purged water.
2
6.Disassemble Motor assembly
3
Be careful not to lose the rubber nozzle
14
by anticlockwise turning. Insert the Return fitting plug (RF Plug)
, Filter Cartridge
, it is
7
3
7. Check the Motor Seal
2
to make it engage with Skimmer Seal Ring
2. Unplug the power.
5. Remove the Motor Seal Nut
Do not pull or push the canister as you can to avoid engagement damage
between canister and pool liner.
from bottom side to make sure it at the original slot correctly.
4
Use left hand to hold the motor from Canister inside. Make sure the motor water outlet
align with Canister outlet direction. Then use right hand to tighten the Motor Seal Nut
like the arrow direction (One more people help will be easier for replacement).
1
closely.
.
by turning according to the arrow direction.
1
left hand
Nozzle 2
(motor outlet)
keyway between
motor and canister
Outlet of Canister. Make sure
align with motor outlet.
Hide quick links:
Advertisement
