Controlling The Audio Device (Bluetooth Connection) - Sony WI-XB400 Help Manual

Wireless stereo headset

Hide thumbs Also See for WI-XB400:

Table of Contents

Help Guide

Wireless Stereo Headset

WI-XB400

Controlling the audio device (Bluetooth connection)

If your Bluetooth device supports the device operating function (compatible protocol: AVRCP), then the following

operations are available. The available functions may vary depending on the Bluetooth device, so refer to the operating

instructions supplied with the device.

Each button has the following function:

(play)

Press once during pause to start playback.

Press once during playback to pause.

- (volume -)/

(previous)

+ (volume +)/

(next)

Adjust the volume.

Press and hold until you hear a beep to skip to the beginning of the previous track (or the current track during

playback)/beginning of the next track. After releasing the button, press it repeatedly within 1 second to hear a beep

and skip to the beginning of the previous/next track.

Note

If the communication condition is poor, the Bluetooth device may react incorrectly to the operation on the headset.

The available functions may vary depending on the connected device. In some cases, it may operate differently or may not work

at all even when the operations described above are performed.

Table of Contents