Table of Contents
Advertisement
Help Guide
Wireless Stereo Headset
WI-XB400
Initializing the headset to restore factory settings
If the headset does not operate correctly even after resetting, initialize the headset.
Turn off the headset while the USB Type-C cable is disconnected and then press and hold the
(power) button and
the - button simultaneously for 7 seconds or more.
The indicator (blue) flashes 4 times (
), and the headset is initialized. This operation resets volume settings,
etc. to the factory settings, and deletes all pairing information. In this case, delete the pairing information for the headset
from the device and then pair them again.
If the headset does not operate correctly even after initializing, consult your nearest Sony dealer.
5-004-986-11(1) Copyright 2019 Sony Corporation
104
Advertisement
Table of Contents
