Sony WI-XB400 Help Manual page 37

Wireless stereo headset

Hide thumbs Also See for WI-XB400:

Table of Contents

If Passkey (*) input is required, input "0000".

The headset and computer are paired and connected with each other. You will hear the voice guidance say,

"Bluetooth connected".

If they are not connected, see

If [WI-XB400] does not appear on the display of the computer, try again from the beginning of step 3.

A Passkey may be called "Passcode", "PIN code", "PIN number", or "Password".

Hint

The operation above is an example. For more details, refer to the operating instructions supplied with the computer.

To delete all Bluetooth pairing information, see

Note

If pairing is not established within 5 minutes, pairing mode is canceled, and the headset turns off. In this case, start the operation

over from step 1.

Once Bluetooth devices are paired, there is no need to pair them again, except in the following cases:

Pairing information has been deleted after repair, etc.

When a 9th device is paired.

The headset can be paired with up to 8 devices. If a new device is paired after 8 devices are already paired, the registration

information of the paired device with the oldest connection date is overwritten with the information for the new device.

When the pairing information for the headset has been deleted from the Bluetooth device.

When the headset is initialized.

All of the pairing information is deleted. In this case, delete the pairing information for the headset from the device and then pair

them again.

The headset can be paired with multiple devices, but can only play music from 1 paired device at a time.