Table of Contents
Advertisement
Figure 92. Removing the holder from the bracket
b. Recycle the component in compliance with local regulations.
Install the flash power module
Follow instructions in this section to install the flash power module.
About this task
Attention:
• Read "Installation Guidelines" on page 121 and "Safety inspection checklist" on page 122 to ensure that
you work safely.
• Touch the static-protective package that contains the component to any unpainted metal surface on the
server; then, remove it from the package and place it on a static-protective surface.
Watch the procedure. A video of the installation and removal process is available:
• YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-BXei6L6c05osQVLt4w5XYx
• Youku:
https://list.youku.com/albumlist/show/id_59636529
Procedure
Step 1.
Install the flash power module.
.
Chapter 4
Hardware replacement procedures
149
Advertisement
Table of Contents
