Table of Contents
Advertisement
2. Disassembly of housing (A).(B) set
(1) Remove the eight Tapping Screws (W/Flange) D3 x 16 [4] from the drill body, hold Housing (A).(B) Set
[11] at its battery mount portion, and then gently open Housing (A).(B) Set [11].
(2) Remove housing (B) and remove such built-in parts as modules and units. Lift up Gear Box (C) [3] to
remove the built-in parts together from housing (A). The built-in parts are Gear Box (C) [3], Wiring Ass'y
[6], Battery Terminal [10], Pushing Button [7], and Shift Knob [9].
• Disassembly of housing (A).(B) set
[9]
[3]
[6]
[7]
[8]
-2-
[4]
[10]
[11]
Advertisement
Table of Contents
