Map Your Device In Pen Mode - Wacom Intuos S User Manual

Map your device in pen mode

Pen
In mode, you use the pen like a regular pen, and you interact with the device as if it is your paper. Each point on the device
maps absolutely to a specific point on your monitor, and the cursor jumps to the corresponding point on your monitor when you
place your pen on the device.
Pen
If you select mode, you can see a representation of how your device maps to your monitors on the
a different mapping than what is shown, you can change it.
1. In Wacom Tablet Properties, select your pen from the
2. From Mode, select Pen
By default, the active area of the device maps to your entire monitor. If you are using more than one monitor, the
device maps to all monitors.
CAUTION
: If you change the display properties in your computer's display menu, you are also changing the
mapping on this tab.
Screen Area
3. From , select which part of your monitor that you want the device to map to:
Full
Select if you want to map to the entire area of the monitors connected to your computer.
Select Portion
ways:
Drag Handles
Under
Select Click to Define
Enter Coordinates
Monitor
Select a
Tablet Area
4. From , select which part of your device that you want mapped to the
The options are similar to the
5. Select Force Proportions
monitors.
Force Proportions
If you select
of the device active area may no longer be usable.
If you do not select
Tip
: To help you decide which setting to select, watch the red borders of the image on this tab while selecting and
unselecting Force Proportions
.
if you want to define a section of your monitor to map to. Select the section in any of the following
, drag the corners of the red border to define the screen area that you want to map to.
and use your cursor to select the screen area that you want to map to.
in pixels.
if you want to map to the entire area of a single monitor.
Screen Area
if you want the vertical and horizontal proportions to be the same on your device as on your
and draw a circle on the device, it displays as a circle on the screen, but a portion
Force Proportions
and draw a circle on the device, it might display as an ellipse on the screen.
to see how it affects mapping.
Tool
list and then select the
options.
User's Manual
Mapping
tab. If you want
Mapping
tab.
Screen Area
you selected.
48
48