Transport With Lifting Devices - Bosch rexroth 60 Series Instruction Manual

22/60 Transport and storage
Transport via transport
lug on housing
Transport with lifting strap
Bosch Rexroth AG, A10VOH Series 60, RE 92704-01-B/2020-01-21
6.1.2 Transport with lifting devices
For transporting, the axial piston unit can be connected to a lifting device via a
transport lug on the housing. Alternatively, it can also be transported with a lifting
strap. When selecting the means of transport, consider the permissible total weight.
Only use the lifting strap if you are unable to achieve the required installation
position by transporting with the transport lug.
The axial piston unit can be connected to a transport lug (1) for transport via a
lifting device on the housing using a sling chain.
▶ Make sure that each sling chain can bear the total weight of the axial piston unit
plus approx. 20%.
You can lift the axial piston unit as shown in Fig. 4 via the transport lug.
1
Fig. 4: Transport lug on the housing
WARNING! Danger due to suspended loads!
During transport with lifting strap, the axial piston unit can topple out of the lifting
strap and cause injury.
▶ Use the widest possible lifting strap.
▶ Make sure that the axial piston unit is securely fixed with the lifting strap.
▶ Only guide the axial piston unit by hand for fine positioning and to avoid swinging.
▶ Never step or grip under suspended loads.
▶ Place the lifting strap around the axial piston unit in such a way that it does not
pass over assembled parts (e.g. valves, piping) and that the axial piston unit is
not suspended from assembled parts (see Fig. 5).