K-TEK KP Installation & Operation Manual page 10

NOTES
INTERNAL WIRING PATHS SHOULD BE RUN AS SHOWN
FAILURE TO DO SO CAN RESULT IN RESTRICTED
SWITCH ACTUATION
DO NOT RUN WIRING WITH EXTRA LENGTHS
DO NOT "STUFF" EXTRA WIRING AGAINST
SWITCH ASSEMBLY
MANUALLY EXERCISE MOTOR BRACKET
ROTATION TO ENSURE FREE, UNRESTRICTED
MOTION AFTER WIRING CONNECTIONS
HAVE BEEN MADE
KP-0200-1 Rev f (10-2010) DCN0536
Recommended Field Wiring Routing
Figure 8
TO POWER SUPPLY
TO FIELD DEVICE
i.e. PUMP, CONVEYER, ETC.
10