Advertisement
Quick Links
www.fetco.com
Heated LUXUS
INNOTHERM DISPENSERS
Weights & Capacities
HEIGHT
23 in./584mm
CAPACITY
WEIGHT-EMPTY
1.5 gallon/5.7 liter
D467--
D477--
D478--
Power configuration
IMPORTANT NOTICE:
RE: Connecting & Disconnecting the Power Supply
-Disconnect power supply module before filling and cleaning.
-Reconnect power supply for beverage service
-Never expose the power supply module or wires to moisture
IMPORTANT NOTICE
-Use only FETCO Power Supply 1102.00278.00.
-This part has the correct over voltage/current / short circuit
protection.
INNOTHERM heated dispenser will operate in heating mode only
when connected to the plug-in power supply included with
dispenser and filled with heated liquid that is at least 145°F
Never expose power supply module or wires to moisture
Do not energize INNOTHERM dry or without cover/funnel
INNOTHERM must contain liquid above 145°F to operate
Contact Information
FETCO®
Food Equipment Technologies Company
600 Rose Road
Lake Zurich • IL • 60047-1560 • USA
© 2018 Food Equipment Technologies Company
User's Guide and Operator Instructions
INNOTHERM™
®
WIDTH
LENGTH (BASE)
9 in./230mm
13 in./335mm
WEIGHT-FILLED
11.3lb/5.1kg
23.8lb/10.8 kg
Heated INNOTHERM
Heated Server
Heated Server and Stand
40 Watts
WARNING!
Thermal Dispensers & Servers
FEATURES
-Works with all 1.5 gallon FETCO coffee brewers
Works with most brewers-use your existing equipment!
>
-No base required-Save on additional equipment costs.
-Portability-Plug‐in or transport to anywhere.
-Gentle heating to help preserve taste profiles
-Fully insulated to help with heat retention.
-Fully sealed heating system
-Built‐in programmability for time and temperature
Program user settings without dismantling the unit.
-LED status indicator on front of INNOTHERM
‐
Multi
Color LED for quick reference.
HEIGHT
14¾ in./374mm
CAPACITY
1.5 gallon/5.7 liter
Required power supply FETCO Part # 1102.00278.00
Power supply output 24 VDC 2.0 Amp
DC output connector Center positive
Power supply input 100-240VAC 2.0Amp 50/60 Hz
Plug configuration NEMA 1-15
Internet: www.fetco.com
Phone: (800) 338-2699 (US & Canada)
(847) 719-3000
Fax: (847) 719-3001
Email: sales@fetco.com
fetco.com
techsupport@fetco.com
INNOTHERM SERVERS
Weights & Capacities
WIDTH
9 in./230mm
WEIGHT-EMPTY WEIGHT-FILLED
7.2lb/3.3kg
User programming interface
with indicating LED lights
Simple Magnetic Connector
...Bring together and "click"
P136 March, 2019
LENGTH (BASE)
12½ in./317mm
17.6lb/8.0 kg
Advertisement
Related Manuals for Fetco INNOTHERM L4-HD15
Summary of Contents for Fetco INNOTHERM L4-HD15
- Page 1 INNOTHERM™ ® Heated LUXUS Thermal Dispensers & Servers FEATURES -Works with all 1.5 gallon FETCO coffee brewers Works with most brewers-use your existing equipment! > -No base required-Save on additional equipment costs. -Portability-Plug‐in or transport to anywhere. -Gentle heating to help preserve taste profiles -Fully insulated to help with heat retention.
-
Page 2: After Startup
DEFINITIONS OF LED Light COLORS TIMER TEMPERATURE STATUS GREEN LED RED LED BLUE LED DURING STARTUP DURING STARTUP DURING STARTUP 1 flash-4 hours “ON” 1 flash-170°F/76.7°C 2 flashes-8 hours “ON” 2 flashes-176°F/80°C 3 flashes -24 hours “ON” 3 flashes-182°F/83.3°C (Inactive during startup) (4 hours is factory set default) 4 flashes =-188°F/86.7°C 24 hrs. - Page 3 INNOTHERM HEATED DISPENSER PROGRAMMING STEPS: 1. Connect power supply (magnetic power connection is located on right side of the dispenser). ON STARTUP: Whenever INNOTHERM is powered up, the unit displays the current TIME & TEMPERATURE setting -Time is displayed by the number of GREEN LED flashes -Temperature is displayed by the number of...
- Page 4 INNOTHERM HEATED DISPENSER ERROR DIAGNOSTICS: For Service and Repair. An ERROR STATE will make the RED LED flash followed by a 2 second PAUSE and repeats the flashing pattern. The dispenser will continue to be in error state until the power is switched OFF. If ERRORS are detected--the dispenser will indicate current TIME and TEMPERATURE setting upon powering up.
- Page 5 Freshness Timer® FETCO indicator funnel Volume Indicator TO REMOVE FUNNEL ASSEMBLY Quad icons, each divided into NOTE: Lower “VEE”+ four upper bars quarter hours segments—The four Blank indicator funnel display is shown, NEVER carry dispenser by the bail handle represent 20% increments of icons represent a time range of four dispenser is “Ready” for brewing -Swing large carrying handle to rear fill level of the dispenser hours ...