Advertisement
Stop Hold Control (Automatic Transmission)
While in headway control using the CTS, your
vehicle will stop when a vehicle ahead stops.
When the vehicle is stopped and the stop hold
control operates, the CTS indicator light turns on.
To resume driving
After the vehicle ahead starts moving while your vehicle is stopped under stop hold
control, press the RES switch or depress the accelerator pedal to cancel the stop
hold control and start driving.
Vehicle departure information
If you do not resume driving within a few seconds after the vehicle ahead starts
moving during stop hold control, the multi-information display vehicle-ahead
indication flashes to urge the driver to resume driving. If you do not resume
driving after the indicator light flashes, a sound is activated to urge you to resume
driving.
For details, refer to Section 4, "i-ACTIVSENSE".
When Driving
37
Advertisement
