Advertisement
Mazda Radar Cruise Control with Stop & Go function
(MRCC with Stop & Go function)
The MRCC with Stop & Go function system is designed to maintain headway
*1
control
with a vehicle ahead according to your vehicle's speed using a front radar
sensor to detect the distance to the vehicle ahead and a preset vehicle speed
without you having to use the accelerator or brake pedals.
*1 Headway Control: Control of the distance between your vehicle and the vehicle
ahead detected by the Mazda Radar Cruise Control (MRCC) system.
Additionally, if your vehicle starts closing in on the vehicle ahead such as if the
vehicle ahead brakes suddenly, a warning sound and a warning indication in the
display are activated simultaneously to alert you to maintain a sufficient distance
between the vehicles.
If the vehicle ahead stops while you are following behind it, your vehicle will stop
and be held stopped automatically (stop hold control), and headway control will
resume when you resume driving the vehicle such as by pressing the RES switch.
Do not rely completely on the MRCC with Stop & Go function:
The MRCC with Stop & Go function system has detection limitations
depending on the type of vehicle ahead and its conditions, the weather
conditions, and the road conditions. Additionally, the system may be unable to
decelerate sufficiently to avoid hitting the vehicle ahead if the vehicle ahead
applies the brakes suddenly or another vehicle cuts into the driving lane,
which could result in an accident.
Always drive carefully and verify the surrounding conditions and depress the
brake pedal or accelerator pedal while keeping a safe distance from vehicles
ahead or on-coming vehicles.
WARNING
For details, refer to Section 4, "i-ACTIVSENSE".
When Driving
27
Advertisement
