Advertisement
When Driving
Stop Hold Control
While in headway control using the
MRCC with Stop & Go function system,
your vehicle will stop when a vehicle
ahead stops. When the vehicle is stopped
and the stop hold control operates, the
MRCC with Stop & Go function
indicator light turns on.
To resume driving
After the vehicle ahead starts moving while your vehicle is stopped under stop hold
control, press the RES switch or depress the accelerator pedal to cancel the stop
hold control and resume driving.
Resume driving information
If you do not resume driving within a few seconds after the vehicle ahead starts
moving, the multi-information display vehicle-ahead indication flashes to urge the
driver to resume driving. If you do not resume driving after the indicator light
flashes, a sound is activated to urge you to resume driving.
31
For details, refer to Section 4, "i-ACTIVSENSE".
Advertisement
