Table of Contents
Advertisement
Maintenance
SD-AT50H
DX-AT50H
ENGLISH
! Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a
dry cloth.
" Do not use chemicals for cleaning (petrol, paint thinner, etc.). It may damage the
cabinet finish.
" Do not apply oil to the inside of the each component. It may cause malfunctions.
Optional accessories
Use only the specified optional accessories to operate this product properly.
For speaker installation, read instructions supplied with stands or brackets.
FLOOR SPEAKER STAND
Model: AD- AT10ST
SPEAKER WALL BRACKET
Model: AD- AT10SA
The appearance of optional accessories may differ from the illustrations above.
E-55
TABLE SPEAKER STAND
Model: AD- AT10LS
OPTICAL DIGITAL CABLE
Model: AD-M3DC
Specifications
As part of our policy of continuous improvement, SHARP reserves the right to make
design and specification changes for product improvement without prior notice. The
performance specification figures indicated are nominal values of production units.
There may be some deviations from these values in individual units.
! AV control unit
Dimensions
Width: 215 mm (8-1/2")
Height: 58 mm (2-5/16")
Depth: 261 mm (10-5/16")
Weight
1.3 kg (2.9 lbs.)
Audio input terminals
Optical digital input (AUX): Square type 1
Coaxial digital input (DVD/CD): RCA type 1
Analog input (DVD/CD): RCA type 1 pair (L/R)
Analog input (TV): RCA type 1 pair (L/R)
Analog input (VCR): RCA type 1 pair (L/R)
Analog input (AUX): RCA type 1 pair (L/R)
Audio output terminal Headphones: 16 - 50 ohms (recommended: 32 ohms)
Other terminals
System control 3
Frequency range
FM: 87.5 - 108 MHz
AM: 522 - 1,620 kHz
02/8/28
SD-AT50H(H)E6.fm
Advertisement
Table of Contents
