Electrolux Frigidaire GRFG2353AF Use & Care Manual page 20

20
CONTROLS AND SETTINGS
Internal Water Dispenser Control Display
1
2
3 4
5 6
7
8
Setting cooling temperatures
Select the compartment where you want to change the temperature by pressing
the FREEZER or REFRIGERATOR buttons at the top of the display. Press the + or −
buttons to adjust the temperature to the desired setting.
The temperature setting will begin to blink with the first touch. The display will time
out after 10 seconds and return to the basic display.
Change
1
Temperature
Clear Alerts
2
Freeze
3
Boost
Temp F/C
4
Water
5
Dispenser
Default
6
Settings
Water Filter
7
Air Filters
8

NOTE
The recommended settings for a product installed in a
kitchen is 37˚F for the refrigerator and 0˚F for the freezer.
Select Freezer or Refrigerator icon to
change temperature.
Select +/- buttons to set the
temperature
Freezer -6˚F/-21˚C –
control range: +6˚F/-15˚C
Refrigerator +34˚F/+1˚C –
control range: +44˚F/+7˚C
Resets any alarms that are active and
illuminated on the display (DOOR
OPEN, HIGH TEMP, POWER OUTAGE).
Prior to grocery shopping, we
recommend you activate Freeze Boost to
lower the temperature and freeze food
faster. Freeze Boost will remain active
for up to 24 hours before automatically
deactivating or manually exiting by
pressing Freeze Boost to turn the
function off. This will reset the freezer to
the previous temperature setting.
Touch to toggle display from Fahrenheit
to Celsius.
When the water dispenser is turned on
the LED's above Water Dispenser will
be illuminated.
Press and hold button for 3 seconds to
reset to Factory settings.
Press and hold button to reset after
filter has been replaced, status shown
at right of button will reset to GOOD.
Press and hold to reset after filter has
been replaced, status shown at right of
button will reset to GOOD.