Installing In Windows; Installing In Macintosh - Epson Stylus Color 680 Setup Manual

Installing in Windows 3.1

Follow the steps below to install the printer software.
1. Make sure that Windows 3.1 is running and that the Program Manager
window is open.
2. Insert the printer software CD that is shipped with your printer in the
CD-ROM drive. (If you use the floppy disk version, insert it in the
floppy-disk drive.)
Click Run on the File menu. The
3.
Run dialog box opens. In the
Command Line box, type D:SETUP
and click OK. If the CD-ROM drive
has a drive letter other than "D", or
if you are using the floppy disk
version, substitute the appropriate
letter.
4. The installation program begins copying the printer software files.
5. When the installation is complete, click OK to exit the installation
program.
The installation program automatically selects this printer as the default
printer for Windows applications.
For information on opening and using the software, see "Using the Printer
Software for Windows" in the Daily Use guide.

Installing in Macintosh

Follow the instructions in this section to install the printer software and then
to select your printer in the Chooser.
?
Caution:
Turn off all virus protection programs before you install the printer
software.
Installing the printer software
Follow these steps to install your printer software.
1. Turn on your Macintosh and insert the software CD in the CD-ROM
drive. The EPSON printer software CD-ROM opens automatically.
2. If a single Installer icon appears, double-click the icon. If separate
folders containing Installer icons for several languages appear, double-
click the folder for your preferred language, then double-click the
Installer icon inside it.