Attaching the Paper Support
Insert the paper support into the slots at the rear of the printer and place the
printer on a flat, stable surface.
Plugging In and Connecting the
Printer
Your printer connects to your computer via the parallel or USB interface.
Macintosh computers can only be connected via the USB interface.
Depending upon your geographic location, you may need to obtain the
appropriate cable. See "Options and Consumable Products" in the Daily Use
guide for details.
Note:
In order to connect your PC via the USB interface, your computer must be a
Windows 98 or Windows 2000 pre-installed model that is equipped with a USB
port.
If you use a USB hub, we recommend that you connect the printer to the first
tier of the hub, or connect the printer directly to the computer's USB port.
Using a parallel interface for Windows users
To connect the printer to your PC, you need a shielded, twisted-pair parallel
cable. Follow the directions below.
1.
Make sure that both the printer and the computer are turned off. Plug
the power cord into a properly grounded electrical outlet.