For Windows Users - Epson Stylus Color 680 Setup Manual

For Windows users

Follow these steps to print the sample file.
1. Make sure that A4 or Letter size EPSON Photo Quality Ink Jet Paper is
loaded in the printer.
2. Insert the printer driver CD in the CD-ROM drive. If the Installer dialog
box appears, click
Double-click the My Computer icon and then the CD-ROM icon. Then
3.
double-click the sample.bmp file to open it.
4. To change the printer driver settings, click
Print on the File menu. A Print dialog box
similar to the one on the right opens. (This
example is from Paint).
5. Make sure your printer is selected in the
Name list box, then click Properties. The
printer driver opens.
6. Click the Main tab, then click anywhere in
the Media Type box and select Photo
Quality Ink Jet Paper.
7. Select Color as the Ink setting.
8. Select Automatic as the Mode setting.
When Automatic is selected, the printer
software optimizes other settings
according to the Media Type and Ink
settings you make.
9. Click the Paper tab, then click anywhere in the Paper Size box and select
the paper size that is loaded in the printer.
10. Click OK at the bottom of the printer driver window. You return to the
Print dialog box (or a similar dialog box).
11. Click Close, Print, or OK to print. You may need to click a combination
of these buttons.
While printing, the EPSON Progress Meter (in Windows 98, 95, 2000 and
NT 4.0) or the EPSON Despooler dialog box (in Windows 3.1) is
displayed, showing the printing progress and the status of your printer.
Quit.