Epson Stylus Color 640 User Manual page 138

Possible cause
You're using a switch
box with your printer.
Your video driver may
be conflicting with the
EPSON printer driver.
The margins are incorrect
Possible cause
Margins are set
incorrectly in your
software application.
Paper settings in the
printer software are
incorrect for your
paper size.
The image size or position is incorrect
Possible cause
The paper and/or
layout options are set
incorrectly.
Troubleshooting
Solution
Connect the printer directly to your computer and try printing again.
Try using a standard VGA video driver (see your computer or video card
documentation for instructions on changing video drivers). If your printout
is correct, your video driver is interfering with the printer driver. Contact
your computer or video card manufacturer to see if an updated driver is
available.
Solution
Check your software documentation for instructions on selecting the
correct margins for your paper size. Make sure the margins are within the
printable area of the page. See
Select the correct paper settings for your paper size. Make sure the
Printable Area setting is correct for your project. See
Media for more information.
Solution
Check the paper settings and the settings in the Layout dialog box
(Windows 95, 98, and NT only). See
instructions. Also check the paper and layout settings in your application
software.
Printable area for more information.
Selecting Print Layout Options
Printing on Special
for
Page 138