Epson Stylus Color 640 User Manual page 109

Warning:
If ink gets on your
hands, wash them
thoroughly with soap
and water. If ink gets
into your eyes, flush
them immediately with
water.
Caution:
Never turn off the
printer while the
P power light is
flashing, unless the
printer hasn't moved
or made any noise for
more than 5 minutes.
Maintenance and Transportation
4 Pull up the ink cartridge clamp. The cartridge rises up from its
holder.
5 Lift the cartridge out of the printer and dispose of it carefully.
6 Remove the new ink cartridge from its packaging.
7 Remove only the yellow part of the tape seal on the top of the
cartridge. Do not remove the blue label.
8 Lower the ink cartridge into its holder with the blue label facing
up and toward the back of the printer.
9 Press down the ink cartridge clamp until it locks in place.
10 Press the E load/eject button and close the printer cover.
The printer moves the print head and begins charging the ink
delivery system.
The Ppower light flashes and the printer makes various
sounds. Charging takes about one minute. When it's finished,
you can print again.
Page 109