Epson Stylus Color 640 User Manual page 13

Place the printer near a wall outlet where the plug can be easily
unplugged.
Placez l'imprimante près d'une prise de contacte où la fiche
peut être débranchée facilement.
Do not let the power cord become damaged or frayed.
If you use an extension cord with the printer, make sure the
total ampere rating of the devices plugged into the extension
cord does not exceed the cord's ampere rating. Also, make
sure the total of all devices plugged into the wall outlet does not
exceed 15 amperes.
Except as specifically explained in this Manual , do not attempt
to service the printer yourself.
Unplug the printer and refer servicing to qualified service
personnel under the following conditions:
If the power cord or plug is damaged; if liquid has entered the
printer; if the printer has been dropped or the cabinet damaged;
if the printer does not operate normally or exhibits a distinct
change in performance. Adjust only those controls that are
covered by the operating instructions.
Do not put your hand inside the printer or touch the cartridge
during printing.
Under normal circumstances, ink will not come out of the
cartridge. If it does get on your skin, wash it off with soap and
water. If it gets in your eyes, flush them immediately with water.
Introduction Page 13