Epson Stylus Color 640 User Manual page 125

Possible cause
The Media Type
setting doesn't match
the loaded paper.
Ink has leaked inside
the printer.
You're using the
MicroWeave and
High Speed settings
with a misaligned print
head.
The resolution of your
image may be too low.
Troubleshooting
Solution
Make sure the Media Type setting matches the paper you're using. See
Setting Printer Options from Windows Applications
Clean carefully inside the printer to remove spilled ink. See
Printer for instructions.
Turn off High Speed (see
Effects). Then run the Print Head Alignment utility following the
instructions in Aligning the Print
If a photographic image looks grainy or rough, try using the
PhotoEnhance3 (PhotoEnhance on Windows 3.1) and Sharpness
setting to improve the printed quality. See
details. You can also increase the image resolution using your
image-editing software, or decrease the size of the image.
Customizing Print Quality and Special
Head.
Adjusting Color Settings
for instructions.
Cleaning the
for
Page 125