Epson Stylus Color 640 User Manual page 129

The P power and S paper out lights are flashing and the B black and A color ink out
lights are on
Possible cause
Jammed paper may be
blocking movement of
the print head.
All the lights are flashing
Possible cause
You haven't removed
all the packing
material from the
printer.
An internal error may
have occurred.
The printer has finished charging the ink cartridge, but the P power light is still
flashing
Possible cause
The ink cartridge
clamp isn't locked
down.
Packing material
remains in the printer.
Troubleshooting
Solution
Turn off the printer, wait a few seconds, and turn it back on to eject any
paper. If no paper is ejected, turn off the printer, remove the jammed
paper, and turn it on again. If the lights are still flashing and on, contact
EPSON as described in
Solution
Remove the packing material, following the instructions on the
Unpacking Sheet .
Turn off your printer, wait a few seconds, and turn it on again. If the lights
still flash or stay on, contact EPSON as described in
Solution
Press down on the clamp to lock it into place.
Remove the packing material, following the instructions on the
Unpacking Sheet .
Where To Get Help.
Where To Get Help.
Page 129