Editing A Text Field - Promax DT-101B Quick Configuration Manual

3.3 Editing a numeric field
1.- Press the ENTER
2.- Press the RIGHT
between digits. On the right of the screen, a number shows in
what position the cursor is (units, tens, hundreds or thousands).
3.- To change a digit press the UP
4.- After editing the numeric field, press the ENTER
confirm and exit the option.
WARNING!
To VALIDATE a change you should press the ENTER
key. If you press the ESCAPE
accepted.
3.4

Editing a text field

1.- Press the ENTER
2.- At the right of the screen, there is a letter and a number. The
number means the position of the character in the word you are
editing. The letter next to the number means the type of
character you are using ("A" for capital letters, "a" for small
letters, "@" for symbols and "1" for numbers).
3.- Press the RIGHT
characters in the word. To delete a character press the RIGHT
or LEFT
4.- To change a character, press the UP
change the type of character (capital letters, small letters,
symbols or numbers) press the UP
one second.
5.- After editing the word press the ENTER
word and exit the option.
Page 8
QUICK CONFIGURATION GUIDE. DT-101B/102B
key to get into an menu option.
or LEFT
key, the change will not be
key to get into the menu option.
or LEFT
key for one second.
key to move the cursor
or DOWN key.
key to move between
or DOWN
or DOWN
key to validate the
key to
or UP
key. To
key for
02/2012