Drying Steps; Cupboard Dry - Beko WDIK754421 User Manual

• Anti-Crease+
If you press and hold the spin selection button
for 3 seconds, this function will be selected and
the programme follow-up light of the relevant
programme will turn on. When this function is
selected, it aerates the laundry for up to 8 hours
at the end of the programme to prevent creasing.
You can cancel the programme and take your
laundry out at any time during the 8-hour
duration. Press the function selection key or the
machine on/off key to cancel the function. The
programme follow-up light will remain on until the
function is cancelled or the step is complete. If
the function cannot be cancelled, it will be active
in the subsequent washing cycles as well.
• Steam
You can press and hold the auxiliary function key
2 for 3 seconds to select this function.
Use this programme to reduce the wrinkles and
shorten the ironing times for a small amount of
cotton, synthetic or mixed clothes that are not
stained.
• Child lock
You can use the Child Lock to prevent children
from tampering with the machine. Thus you can
avoid any changes in a running programme.
C
INFORMATION
• When the Child Lock is enabled, you can
press the On/Off key to switch the machine
on or off. Programme resumes when you
start the machine again.
• You will hear a warning if the buttons are
pressed while Child Lock is enabled. This
audible warning will be cancelled if the
buttons are pressed five times consecutively.
To enable Child Lock:
Press and hold the Drying Level
Adjustment button for 3 seconds. When the
countdown "3-2-1" on the display ends, child
lock icon will be displayed. Once you see this
warning, you can release the Drying Level
Adjustment button.
To disable Child Lock:
Press and hold the Drying Level
Adjustment button for 3 seconds. When the
countdown "3-2-1" on the display ends, child
lock icon will disappear.
31 / EN
• Bluetooth
You can use the Bluetooth connection function
to pair your machine with your smart device.
This way, you can use your smart device to get
information about your machine and control it.
To enable Bluetooth:
Press and hold the Remote Control
function button for 3 seconds. You will see
the countdown "3-2-1", and bluetooth symbol
will be displayed. Release the Remote Control
function button. The Bluetooth icon will flash
while the product is being paired with the smart
device. If the connection is successful, the light
of the icon will remain on.
To disable Bluetooth:
Press and hold the Remote Control
function button for 3 seconds. You will see
the countdown "3-2-1", and bluetooth symbol
will be disappear.
C
INFORMATION
• You must complete the first setup of the
HomeWhiz app for Bluetooth to be enabled.
After the setup, if you press the Remote
Control function button while the button
is in the Programme Download/Remote
Control position, the Bluetooth connection
will be enabled automatically.

5.12 Drying steps

5.12.1 Iron Dry
Drying continues until the drying level reaches
the Iron Dry step.

5.12.2 Cupboard Dry

Drying continues until the drying level reaches
the Cupboard Dry step.
-
-
-
-
Washer-Dryer / User Manual