Auxiliary Functions - Beko WDIK754421 User Manual

C
INFORMATION
• If the selected wetness level (Iron Dry,
Cupboard Dry, Cupboard Extra Dry)
cannot be reached at the end of the drying
programme, your machine will automatically
extent the programme duration. The
programme will take longer.
• If Timed Drying is selected, the programme
will end at the end of the drying time even if
the laundry is not dry.
• If, during the drying programme, the selected
wetness level (Iron Dry, Cupboard Dry,
Cupboard Extra Dry) is reached or extra
dryness is detected in the timed drying
options, the programme will take shorter. The
time decrease will be shown on the display.

5.11.1 Auxiliary Functions

• Prewash
A Prewash is required only for heavily soiled
laundry. Not using the Prewash will save energy,
water, detergent and time.
• Fast+
You can press the Quick Wash button to
shorten the programme time after selecting the
programme. For some programmes, the time
can be shortened by over 50%. Still, for medium
and lightly soiled laundry, you will get the same
washing results in a shorter time.
Although it depends on the programme,
pressing the Quick Wash button once will
shorten the programme time down to a certain
level. Press the same button for the second time
to drop the time to the minimum level.
For better washing results, do not use the Quick
Wash button for heavily soiled laundry.
For medium and lightly soiled laundry, use the Quick
Wash button to shorten the programme time.
• Remote Control
You can use this auxiliary function button to
connect your product to smart devices. For
detailed information, see HomeWhiz and the
Remote Control Function.
30 / EN
• Custom Programme
This auxiliary function can be used for Cottons and
Synthetics programmes only with the HomeWhiz
application. When this auxiliary function is enabled,
you can add up to 4 additional rinse steps to the
programme. You can select and use some auxiliary
functions even though they are not found on your
product. You can increase and decrease the time
of the Cottons and Synthetics programmes within
a safe range.
• Drying
This function dries your laundry after the
washing cycle. Please see the programme table
for programmes that can be used with this
function.
5.11.2 Functions/Programmes
Selected by Pressing the
Function Buttons for 3 Seconds
• Drum Clean+
To select this programme, press and hold the
auxiliary function button 1 for 3 seconds. Use
regularly (once in every 1-2 months) to clean the
drum and provide the required hygiene. Before
the programme, it applies steam to soften
residues in the drum. Operate the programme
while the machine is completely empty. To obtain
better results, put powder lime-scale remover
for washing machines into the detergent
compartment no. "2". This programme contains
a drying step that runs after the drum cleaning
step to dry the inside of the machine.
C
INFORMATION
• This is not a washing programme. It is a
maintenance programme.
• Do not run this programme when there are
any objects in the machine. If you try to do
so, the machine will automatically detect
that there is load inside and abort the
programme.
Washer-Dryer / User Manual