Technical Data - Husqvarna QHIO660P User Manual

Problem
comes on.
The control bar blinks.
and a number come on. There is an error in the hob.
You can hear a constant
beep noise.
8.2 If you cannot find a
solution...
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Make sure,
you operated the hob correctly. If not the

9. TECHNICAL DATA

9.1 Rating plate
Model QHIO660P
Typ 62 B4A 22 AA
Induction 7.35 kW
Ser.Nr. .................
HUSQVARNA
Possible cause
Child Safety Device or Lock
operates.
There is no cookware on the
zone or the zone is not fully
covered.
The cookware is unsuitable.
The diameter of the bottom
of the cookware is too small
for the zone.
The electrical connection is
incorrect.
servicing by a service technician or
dealer will not be free of charge, also
during the warranty period. The
instructions about the Service Centre
and conditions of guarantee are in the
guarantee booklet.
PNC 949 597 796 00
220 - 240 V / 400 V 2N 50 - 60 Hz
Made in Germany
7.35 kW
ENGLISH
Remedy
Refer to "Daily use".
Put cookware on the zone so
that it fully covers the cooking
zone.
Use suitable cookware. Refer
to "Hints and tips".
Use cookware with correct di‐
mensions. Refer to "Technical
data".
Deactivate the hob and acti‐
vate it again after 30 seconds.
If comes on again, discon‐
nect the hob from the electrical
supply. After 30 seconds, con‐
nect the hob again. If the prob‐
lem continues, speak to an Au‐
thorised Service Centre.
Disconnect the hob from the
electrical supply. Ask a quali‐
fied electrician to check the in‐
stallation.
37