Main Menu; Config Menu - Lenovo ThinkPad L460 User Manual

To configure the BIOS of your computer, do the following:
1. Turn on the computer. When the Lenovo logo is displayed, press F1. The ThinkPad Setup program starts.
Note: If you are required to enter the supervisor password, enter the correct password. You also can
press Enter to skip the password prompt and start the ThinkPad Setup program. If you do not enter the
password, you cannot change the configurations that are protected by the supervisor password. For
more information, refer to "Using passwords" on page 51.
2. Use the cursor keys to select a tab; or use the cursor keys to locate an item and press Enter to select it.
Then a submenu is displayed.
Note: Some menu items are displayed only if the computer supports the corresponding features.
3. Set the value of an item by doing one of the following:
• Press the F6 key to change to a higher value.
• Press the F5 key to change to a lower value.
Note: Default values are in boldface.
4. To change other configurations, press the Esc key to exit the submenu and return to the parent menu.
5. When you complete the configuration, press the F10 key to save and exit. You also can select the
Restart tab in the ThinkPad Setup menu, and restart your computer with one of the provided options.
Note: You can press the F9 key to restore to the default settings.

Main menu

When you enter the ThinkPad Setup program, you will first see the Main menu as follows:
• UEFI BIOS Version
• UEFI BIOS Date (Year-Month-Day)
• Embedded Controller Version
• ME Firmware Version
• Machine Type Model
• System-unit serial number
• System board serial number
• Asset Tag
• CPU Type
• CPU Speed
• Installed memory
• UUID
• MAC address (Internal LAN)
• Preinstalled OS License
• UEFI Secure Boot
• OA3 ID
• OA2

Config menu

To change the configuration of your computer, select the Config tab from the ThinkPad Setup menu.
64
ThinkPad L460 User Guide