Replacing A Wireless Wan Card - Lenovo ThinkPad L460 User Manual

6. Place the new storage drive into the drive bay.
7. Install the screw to secure the storage drive.
8. Reinstall the rubber caps and the bottom cover. See "Replacing the bottom cover" on page 117.
9. Reinstall the battery. See "Replacing the battery" on page 113.
10. Turn the computer over again. Connect the ac power adapter and all cables.

Replacing a wireless WAN card

Before you start, print these instructions and read "Important safety information" on page iv.
Note: This information is only for the user-installable modules.
Attention: Before you start installing a wireless WAN card, touch a metal table or a grounded metal object.
This action reduces any static electricity from your body. Static electricity could damage the card.
To replace the wireless WAN card, do the following:
1. Turn off the computer. Then disconnect the ac power adapter and all cables from the computer.
2. Remove the battery. See "Replacing the battery" on page 113.
3. Remove the rubber caps and the bottom cover. See "Replacing the bottom cover" on page 117.
.
Chapter 10 Replacing devices
127