Unpack
ThinkPad
®
computer
Initial setup instructions
1.
Install the battery pack.
2.
Connect the power cord to the ac power adapter
connector on your computer
Ensure that all power cord connectors are securely and completely plugged into receptacles.
3.
Press the power button
4.
Configure the operating system following the on-screen instructions to complete the initial setup.
This process takes several minutes.
Additional information about using your ThinkPad computer is in the User Guide. See "Accessing your
User Guide" later in this document.
Safety, Warranty, and Setup Guide
Brief user notices
ThinkPad L440 and L540
http://www.lenovo.com/support
Battery
This system supports only batteries specially designed for this specific system and
manufactured by Lenovo or an authorized builder. The system does not support
unauthorized batteries or batteries designed for other systems. If an unauthorized
battery or a battery designed for another system is installed, the system will not
charge.
Attention: Lenovo has no responsibility for the performance or safety of
unauthorized batteries, and provides no warranties for failures or damage arising
out of their use.
, and connect the power cord to a properly grounded ac power outlet
to turn on the computer.
Power cord
ac power adapter
, connect the ac power adapter to the power
Documentation
.
Need help?
Do you have a question about the ThinkPad L440 and is the answer not in the manual?
Questions and answers