4. Loosen the screws and pry up the latches. Then remove the base cover assembly.
5. Install the new base cover assembly and tighten the screws.
6. Turn the computer over. Connect the ac power adapter and all cables to the computer.
Replacing the wireless-WAN card
The following information only applies to computer models with user-installable modules.
Before you start, read "Important safety information" on page v and print the following instructions.
Attention: Before you start installing a wireless-WAN card, touch a metal table or a grounded metal object.
This action reduces any static electricity from your body. Static electricity could damage the card.
To replace the wireless-WAN card, do the following:
.
Chapter 9
Replacing devices
97