Installation; Transmitter - Geemarc CL7370 OPTI Manual

INSTALLATION

Transmitter

(D1) Connect the Power Supply to yellow Socket (5V/1A)
located on the Charge Cradle rear panel.
(D2) Connect the Power Supply to an electricity socket (100-
240V ~ 50/60Hz).
(D3) Connect one end of the Audio Cable to Analogue Audio
Input in the rear panel of the Charge Cradle.
(D4) Connect the other end of the Audio Cable to your Audio
Source (e.g. TV set, Hi-Fi system, MP3 or iPod).
If your Audio Source does not have a suitable socket
for the Audio Cable's 3.5 mm stereo plug, then use one
of the Adapters provided:
INSTALLATION
Optical jack
3.5mm headphone socket
6.3mm headphone socket
(Analog version only)
10
RCA socket
SCART
socket