Electrical Safety; Transportation Safety; Installation Safety - Grundig GFNE 8440 User Manual

3.
Do not remove the shelves or
drawers so that it is harder for
children to enter the product.
4.
Remove the doors.
5.
Keep the product in a way that it
will not tip over.
6.
Do not allow children play with the
old product.
•
Never throw the product into fire
for disposal. There is the risk of
explosion!
•
If there is a lock on the door of
the product, the key should be
kept out of the reach of children.

1.3 Electrical safety

•
The product must be
unplugged during installation,
maintenance, cleaning,
repairing and moving
procedures.
•
If the power cable is damaged,
it must be replaced by a
qualified person specified by
the manufacturer, authorised
service agent or importer in
order to avoid potential dangers.
•
Do not squeeze the power cable
under or behind the product. Do
not place heavy objects on the
power cable. Power cable must
not be bent excessively, pinched
or get in contact with any heat
source.
•
Do not use extension cords,
multi-sockets or adapters to
operate the product.
•
Portable multi-sockets or
portable power sources can
overheat and cause fire.
Therefore, do not keep any
multi-sockets behind or near
the product.
4
•
Plug must be easily accessible.
If this is not possible, the
electrical installation to which
the product is connected must
contain a device (such as a fuse,
switch, circuit breaker, etc.)
which conforms to the electrical
regulations and disconnects all
poles from the grid.
•
Do not touch the power plug
with wet hands.
•
Remove the plug from the
socket by gripping the plug and
not the cable.

1.4 Transportation safety

•
Product is heavy; do not move it
alone.
•
Do not hold its door when
moving the product.
•
Pay attention not to damage
the cooling system or the
piping during transportation. If
the piping is damaged, do not
operate the product and call the
authorised service agent.

1.5 Installation safety

•
Call the authorised service
agent for installation of the
product. To make the product
ready for use, check the
information in the user manual
to make sure that the electricity
and water installations are
suitable. If they are not, call
a qualified electrician and
plumber to have the necessary
arrangements made. Otherwise,
there is the risk of electric
shock, fire, problems with the
product, or injury!