Table Of Contents - Dexter Laundry T300 Parts & Service Manual

10
Part # 8533-082-001 11/21
Notes
Dexter Safety
Guidelines
WARNING
These washers are equipped with devices and
features relating to their safe operation. To
avoid injury or electrical shock, do not perform
and service, unless qualified to do so.
FOR SAFETY
1. Always shut off power and water
supply and also discharge capacitors
before servicing.
2. Do not overload the washer.
3. Do not attempt to open door if cylinder
is in motion or contains water.
4. Do not mechanically force or override
door lock in any way.
5. Do not bypass any safety devices of
this washer.
6. Do not use volatile or flammable
substances in or near this washer.
7. Keep all panels in place. They protect
against shock and injury and add
rigidity to the washer.
A machine should not be allowed to
operated if any of the following occur:
• Excessively high water level.
• Machine is not connected to a properly grounded
circuit.
• Loading door does not remain securely locked
during the entire cycle.
• Vibration or shaking from an inadequate mounting
or foundation.
To activate your warranty, be sure to return
your red warranty form to the factory. Please
have serial number and model ready when
calling for assistance.

Table of Contents

Section 1:
Machine Mounting & Installation
T-300 ............................................................14
T-350 & T-400 ................................................15
T-450 & T-600 ...............................................16
T-300 Installation ...........................................17
T-350 Installation ...........................................18
T-400 Installation ...........................................19
T-450 Installation ...........................................20
T-600 Installation ...........................................21
Section 2:
Machine Installation & Operating
Instructions
Basic Installation ............................................24
Electrical Connections & Fusing Requirements .25
Emergency Stop Button .................................26
Machine Operating Instructions ......................27
Detergent Measurements by Model .................28
Section 3:
Machine Programming Instructions
Wash Cycle Programming .......................32 & 36
Coin Washer Cycle Parameter Ranges .....33 & 34
Coin Washer Default Cycle &
Rapid Advance Mode ...............................36
Section 4:
Trouble Shooting
Common Troubleshooting Solutions Pages ..38-40
Troubleshooting Machine Fault
Errors Pages ....................................... 41-45
Motor Winding restances....................................45
Variable Frequency Drive Control
Digital Readout Faults ......................46 & 47
Section 5:
Machine Service Procedures
Lower Service Panel Removal .........................50
Top Panel Removal .........................................50
Part # 8533-082-001 11/21
11