Panel Installation
CAUTION
DO NOT place the panel facedown on the floor,
against a wall, or on uneven surfaces.
Step 1: Remove the front grille.
1. Push both of the tabs towards the middle
simultaneously to unlock the hook on the
grille.
1
Intake grille
2
Grille hook
Fig. 10.1
2. Hold the grille at a 45° angle, lift it up
slightly and detach it from the main body.
Fig. 10.2
Page 24
Step 2: Install the panel
Align the indicate "△" on the decoration
panel to the indicate "△" on the unit .
Attach the decoration panel to the unit with
the supplied screws as shown in gure below.
1
Decoration panel
2
Screws (M5)(supplied with the panel)
After installing the decoration panel, ensure
that there is no space between the unit body
and decoration panel. Otherwise air may leak
through the gap and cause dewdrop. (See
gure below)
10
Fig. 10.3
Fig. 10.4